Trimble Accubid Anywhere

The biggest pro of using Accubid is the ability to make modifications to an existing bid after it has been completed, like owner revisions or addendums adding or deleting materials, relocating equipment and easily moving all the associated branch circuits or feeders.
Another great advantage about using Accubid is the familiar layout of the system which is really similar to a regular excel spreed sheet with several steps that resemble regular tabs.

Accubid can be a little difficult at first, it requires the user to watch the available training videos and any other available training material before a complete estimate can be completed, and the quality of the current videos is not the best, particularly the sound of the videos is muffled and low quality.
High cost for one on one training.

Not much that I like about the Software,

Brutal Customer Support you will be waiting at least 1 to 14 days for them to get back to you for support.
Overly Complicated and a poor database, there is next to nothing for pre-made assemblies and you will spend a lot of money and time getting the system to a level of acceptable/

The Customer Service is Excellent but they are very busy and will get back to you in the same day, you can't catch anyone right away.

- There seems to be little in the database for pre-made electrical Assemblies and Product for what we are paying for.
- System is awkward to work with, seems to be unnecessary steps to items...

- My Mouse keeps disappearing and no one can seem to fix it.

- There are measurements in Junction Boxes and Size Selections that do not pertain to the Product, yet it still shows up as a selection which causes errors, makes no sense.

- There seems to be a lack of continuity or ease of Flow with Accubid Enterprise.

- Run into several Errors where I want an LB Fitting c/w cover and gasket, but I can't seem to get that...I have to create a Spec to allow the Cover and gasket? - Why?

- If you look at the Lighting assemblies in the non-Spec items, some of them do not work and errors show up when Chosen...Don't know why you have it in the system if I have to modify the Non-Spec to a Spec item.

- Just received the LED Lighting update 3 Days ago but I cannot update the assemblies because of losing the present Data on my System and would have to file it into an old file.

- Just wanted a Breakout done, in other Estimating Systems I have used, I choose Breakout Highlight the area I want to have and it will provide a separate item for it...The Breakout that was described to be in my help today seemed to be a lot of Steps and the Tech support lost me in the 1st 3 Minutes and did not explain what seemed like 3 Steps to just get a break-out.

- When I modify a Recap Sheet for a specific Job, it seems to save it for all Jobs in the future, why is there no flexibility with modifying a size or areas to a sheet then having it save specific for that job? Why does it save it for all future Jobs?

- When I create an item in my take-off sheet, why can I not just highlight this and then have it into an assembly? Other Estimating Software Systems do this?

Overall it seems to not be a very great system and I have worked very hard on this system to learn it...It seems that I have to take an extensive training course to learn the ins and outs and the Special things I have to do to make something work. I do not like the fact that I have to create so many personal assemblies for my System because there is such a limited Selection.
Even looking for Low Voltage Switching devices is not easy and that is with using the search engine. There is a lot of Assemblies, but they are basically a lot of repetition of the same items.

I am no Rookie when it comes to Estimating Software but It seem to me that we will have to pay a lot of Money in going to Accubid training sessions to understand the system, that should not be the case. I worked with other Estimating Software for 12yrs and needed to take one basic training course and that was only for upgrades and I learned the system very well.

Issues:
Run Into problem – Picking a Strip Fixture assembly: Sizes(4" X 4100k) for item "Lamp T8 7x CRI TCLP - Fluorescent" not found within the database's Item Sizes table.
“Available Sizes: 24" X 3000K | 24" X 3500K | 24" X 4100K | 36" X 3000K | 36" X 3500K | 36" X 4100K | 48" X 3000K | 48" X 3500K | 48" X 3500K | 48" X 5000K | 4100K X 5000K | 48" X 6500K |
Resolution Details:
Striplight Direct Mount w/ T8 7x CRI TCLP Lamps - Starter Toggle Bolt No Connection Lamp T8 7x CRI TCLP – Fluorescent”
Note: There is just sizing shown – Nothing indicating to Change the Colour of the lamp.
So
I decide to choose a Strip Light Assembly Toggle Bolt Row Mount and this appears:
“Formula "[Wire Size]" within assembly "Striplight Direct Mount w/ T8 7x CRI TCLP Lamps - Row Toggle Bolt" is invalid.” – It did not even ask for a wire size in the Entry.
The Same Applies to all Fixture Choices only the Industrial Indirect Mount works and can only Choose Starter not Row on that selection of assemblies.

Why there are only single face Exits on the Assemblies and why is there not an assembly for a T-Bar Installation?

- Why is there in Floor Boxes selection for Flush Floor Outlets and Recessed Floor Outlets – Is this not the same?
Accubid’s will confirm with the developers and trainers if this is the correct behavior in LiveCount and will get back to me.
Accubid just confirmed with another LiveCount Support rep that continuing a measurement on another page does not merge the counts for AutoCount items.
As Trimble suspected, the AutoCounts for the search pattern “Tel/Data-Drop Drop (Eng, Psyc, and Informative)” was created as separate searches.

- No assembly for a 4 Gang with Dimmer combinations to Empty Assembly for Boxes for 2, 3 & 4 Gang Devices…Had to create my Own to get a basic assembly

- Lost my Link to LiveCount as an Error appeared on my Profile, this is not a User issue.

- I also am having an issue where now when I enter an Item into my take-off is does not appear, when I choose another item then the previous items appears on the take-off screen and this is a step behind for all items I am attempting to Enter.

- Attempted to Choose a 4” Emt Connector, in the Global Items list, the Selection shows up as an error…(See attached e-mail notes below) Why would the Customer “the Customer “me”” have to Manually add an item to an Assembly that was already created by the Designer???

Called about another Issue June 27, 2016 on the Final Pricing Item, the Total Pricing Recap – total Pricing Changes when I modify the Material Overhead Mark-up, but it does not change when I modify the Labour Overhead…

June 27th, just fixed my LiveCount issues this morning with Logging on but now I have lost access again at 1:32PM… to see if there is anything he can do. Managed to get it working again and we discovered that when I chose the View to go onto Ribbon, the System would not work.

June 27th…Called again regarding the Close out and Final pricing when we pinned the Total Overhead Line item 25 at 10% we could change the Material Overhead, but not the Labour Overhead. When I removed the pin, it worked on both…Adam from Accubid is going to look into this as he said it is not supposed to do this and he figures it is some type of bug.

The fact that we were sold on this program by a salesman that could sell an ice cream cone to an eskimo, and we are still using it on the same server environment and have not moved to the cloud. The system is way too smart for what an Estimator needs to put together any type of estimate. We don't care what color a device is, but apparently Enterprise does and will fail the takeoff if you have the wrong color picked. I don't feel like I need to bash this program anymore, you will see from the other responses, its pretty much the same across the board. Our estimating times and stress levels have gone up for no apparent gain what so ever. If anyone says the opposite, they haven't been here long enough to see the con's from Pro. I was a tester for the Cloud environment built by Trimble to see why our system is so slow, and don't know why again we haven't moved to that direction. I think everyone's frustration is more of the slowness of it, on our side at our company. I am being honest about this and would also love some feed back on some of the other issues that you will see from the surveys. To go long with that, actual movement forward on making this program faster and easier to use if we have to continue utilizing this software.